HP OmniBook 7100 Notebook PC - Manual (Page 15)

Using OmniBook Plug-In Modules
9WMRK XLI (:( (VMZI SV (:( *PSTT] (VMZI
1-15
To eject a DVD disk manually
If you lose power to the OmniBook, or if you’ve removed the DVD module from the
OmniBook, you can manually open the DVD drive to remove a DVD disk.
•
Carefully insert a straightened paper clip into the emergency eject hole located
above the eject button, as shown below.
To play DVD movies
2SXI Windows NT does not support the player software.
When you purchase a DVD plug-in module, you will also receive a CD containing
DVD / MPEG player software. Insert the CD and refer to the readme file for software
installation instructions.
For the OmniBook 7150 only, the ATI DVD player is included on the hard disk drive,
but is not installed. Use these steps to install the player software.
•
Click Start, Programs, ATI DVD Player, Setup.