HP OmniBook 7100 Notebook PC - Manual (Page 16)

Using OmniBook Plug-In Modules
9WMRK E 7IGSRH &EXXIV]
1-16
Using a Second Battery
To increase the time you can work on battery power, you can install a second
battery in the OmniBook’s plug-in module bay.
The status panel shows the combined charge level of the both the primary and
secondary battery.
This section describes how to
•
Handle and store the battery safely.
•
Maintain and preserve the battery life.
To handle and store the battery safely
To safely use the battery, follow these instructions:
•
To avoid risk of fire, burns, or damage to your battery pack, do not allow metal
objects to touch the battery contacts.
•
The battery pack is suitable for use only with compatible OmniBook models
and specified battery charger. Check the Support and Service booklet for your
local HP contact.
•
Do not disassemble. There are no serviceable parts inside. Do not dispose of the
battery pack in fire or water.
•
Handle a damaged or leaking battery with extreme care. If you come in contact
with the electrolyte, wash the exposed area with soap and water. If it contacts
the eye, flush the eye with water for 15 minutes and seek medical attention.
•
Do not expose the battery pack to high storage temperatures (above 60 °C,
140 °F).
•
When the battery is not in use, store it in a battery pouch or other
nonconductive case.
•
When discarding a battery pack, contact your local waste disposal provider
regarding local restrictions on the disposal or recycling of batteries.
•
To obtain a replacement battery, contact your local dealer or HP sales office.
•
Do not charge the battery pack if the ambient temperature exceeds 45 °C
(113 °F).