HP OmniBook 7100 Notebook PC - Manual (Page 12)

Using OmniBook Plug-In Modules
9WMRK XLI 07 (VMZI
1-12
Using the LS-120 Drive
The LS-120 drive reads and writes to LS-120 disks (120 MB) and to conventional
3.5-inch IBM-formatted disks (1.44 MB), which are the same size and shape.
However, the LS-120 drive reads and writes to LS-120 disks significantly faster than
conventional disks.
This section describes how to
•
Insert or eject an LS-120 disk.
•
Eject an LS-120 disk manually.
To insert or eject an LS-120 disk
' % 9 8 - 3 2 (S RSX MRWIVX SV VIQSZI ER 07 HMWO [LMPI XLI 3QRM&SSO MW EGXMZIP] VIEHMRK SV
[VMXMRK HEXE 3XLIV[MWI XLI 3QRM&SSO GSYPH WXST VIWTSRHMRK ERH ]SY GSYPH PSWI
HEXE
1. Hold the LS-120 disk with its face up, then slide it into the disk drive slot until it
clicks into place.
2. To remove the LS-120 disk, press the eject button on the front of the drive as you
would with a floppy drive (the drive will take a moment to eject the disk).
--or—
If you’re using Windows 95, right-click the LS-120 drive in Windows Explorer or
My Computer and select Eject. This will not work in Windows NT 4.0.