HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 14)

Commands 14
Perform an update using a firmware image from an FTP server on the network:
vcutil –a update –I 192.168.1.100 –u Administrator –p password –l
ftp://user:[email protected]/vcfw-120.bin
version
Display the current running firmware version on all modules in a specific target enclosure.
Item Description
Syntax vcutil -a version -i -u -p [-b ]
Parameters:
IP IP address of the active OA in the enclosure
USER Name of the OA user with privileges to access all enclosure interconnect bays
PWD Password of the OA user
BAY Optional. The bay number of the target module. If not specified, the default is all supported
modules.
Examples
Display all modules and their current firmware versions:
vcutil -a version -i 192.168.1.100 -u Administrator -p password
Display a single module and its current firmware version:
vcutil -a version -i 192.168.1.100 -u Administrator -p password -b 1