HP Integrity NonStop H-Series - Manual (Page 41)

HP NonStop
RPM User’s Guide Page 41 of 52
5.7 SET Command
SET | S [ ALERTS ON|OFF ]
[ CRIT ]
[ WARN ]
[ INFO ]
[ BUSY | % ]
[ BUSYCPU ]
[ BUSYPB ]
[ ENTRIES ]
[ LOGGING ON|OFF ]
[ LOGFILE ]
[ MAXINPUTS ]
[ MAXIOS ]
[ MAXOUTPUTS ]
[ MAXRCVQ ]
[ MAXSWAPS ]
[ OBEYESCAPE ON|OFF ]
[ PAGECLEAR ON|OFF ]
[ SORT ByCpu | ByNode ]
[ TRACETOKEN ON|OFF ]
[ USECS ON|OFF ]
[ RATE ]
[ TERM TTY | VT100 | T6530 ]
The S or SET command controls properties of the run-time environment.
ALERTS ON|OFF - reserved for future use.
CRIT value of Cpu Busy threshold for Critical alerts.
WARN value of Cpu Busy threshold for Warning alerts.
INFO value of Cpu Busy threshold for Info alerts.
BUSY | % | BUSYCPU | BUSYPB indicates the default busy threshold value.
If BUSY|% is specified then applies to both the CPU and PB
command. Specifying separate BUSYCPU or BUSYPB defines
the BUSY value for the CPU and/or PB commands respectively.