HP Integrity NonStop H-Series - Manual (Page 28)

HP NonStop
RPM User’s Guide Page 28 of 52
RPMCNF - VT100 Configuration file Example #3
The example below ADDs 3 nodes \Chicago, \Newyork, \Sanfran sets the TERM type to VT100 ,
indicates the 10 busiest processes should be displayed for each node (ENTRIES 10), sets SORT
to be BYNODE, sets critical, warn, and info thresholds, sets RATE to 10 seconds, executes a
ZOOM \* command which displays a combined Cpu + PB report that updates every 10 seconds.
!=======================================================
!== RPM VT100 Configuration settings - 08/04/15 10:00:00
!=======================================================
ADD \CHICAGO ! add \chicago to list of nodes
ADD \NEWYORK ! add \newyork to list of nodes
ADD \SANFRAN ! add \sanfran to list of nodes
SET TERM VT100 ! define default term type, VT100, T6530, TTY
SET ENTRIES 10 ! show top 10 busy processes on each cpu/node
SET SORT BYNODE ! sort across all cpus in each node
SET CRIT 50 ! set Critical alert busy threshold 50%
SET WARN 10 ! set Warning alert busy threshold 10%
SET INFO 1 ! set Info alert busy threshold 1%
SET RATE 10 ! set refresh rate in seconds
ZOOM \* ! show both Cpus and Processes every 10 sec