HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem User Manual
Page 59
Virtual Connect users and roles 59
To test an LDAP configuration:
1.
Be sure that LDAP group settings are configured.
2.
Be sure that any LDAP certificates are installed.
3.
Access the LDAP Server Settings (LDAP Server) screen (on page
4.
Enter the LDAP configuration information.
5.
Click Test. The LDAP Configuration Test screen appears.
6.
Enter a valid user name and password.
7.
Click Test.
The status window displays any problems encountered during the test. When testing is complete, click Close.
This manual is related to the following products:
- 4GB Virtual Connect Fibre Channel Module for c-Class BladeSystem Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem