HP Workstation x1100 - Manual (Page 28)

Fire GL2 Software Utilities 25
Setting Resolution, Refresh Rate and
Color Depth
Windows NT 4.0
1. Select the Settings dialog in the Display Properties window.
2. Set the resolution, color depth, and refresh rate that best suit your
requirements and your monitors' performance.
Windows 2000
1. Select the Settings dialog in the Display Properties window.
2. Set the resolution (Screen area) and color depth that best suit your
requirements and your monitors' performance.
3. Select the Monitor dialog via Display Properties > Settings >
Advanced > Monitor.
4. In the Monitor Settings section set the refresh rate for each
monitor connected to the graphics accelerator(s) in your system.
Note: Refer to your Windows 2000 online help and documentation
for further information on using the Monitor dialog.
Notes: (1) Check the documentation of your monitor and make sure
that the monitor supports the planned resolution, refresh rate and color
depth setting.
(2) Use the Diamond Monitor dialog (in Windows NT4), or
Settings\Advanced\Monitor (in Windows 2000) to select and set your
specific monitor.
Use the Adjustment dialog (Settings\Advanced\Adjustment in
Windows 2000) to adapt the display of the monitor connected to the
Fire GL2.