Reassembling your computer – HP Workstation x1100 User Manual
Page 17

Installing the Fire GL2
14
Installation in an AGP expansion slot
1
Fire GL2 card
2
Card edge connector
3
Expansion slot
You may prevent a possible overheating risk, if you - whenever possible
- leave the PCI expansion slot immediately next to the AGP slot free.
Reassembling your Computer
1.
Secure ribbon cables and gently push them down and out of the
way before you replace the system cover.
2.
Replace the computer cover.
3.
Reconnect any peripheral equipment cables you may have
disconnected.
This manual is related to the following products: