beautypg.com

Software installation for windows nt4.0, Software installation for windows nt 4.0, Readme file – HP Workstation x1100 User Manual

Page 23: Driver installation dialog

background image

Installing the Fire GL2

20

You must be running Windows 2000 or
Windows NT 4.0, updated with Service Pack 6 (or newer) before
installing the Fire GL2 drivers. For most languages you can perform
the Service Pack update from the Fire GL CD when you run the
Quick Start utility.

ReadMe file

Select Readme from the Fire GL CD start menu to display a readme
file. Refer to this file for additional and ‘last minute’ information.
Information in this file may not appear in printed documentation or
online help.

Driver installation dialog

The installation dialog will display in English if your operating system’s
language is not supported.

Software Installation for Windows NT4.0

1.

Run the Quick Start utility. The Quick Start utility will start
automatically, if you insert the Fire GL CD into your CD-ROM drive
after the operating system has started. If your CD-ROM auto-run is
not enabled and/or the Quick Start program does not start
automatically:
Click the Start button in the task bar, click Run, and then select
START.EXE from the root directory of the Fire GL CD.

2.

Click Start Installation.
Note: The installation routine now checks if your Windows NT 4.0
is correctly updated with Service Pack 6. If not, you are prompted if
you want to install the drivers and Service Pack 6 at this time – if
the appropriate language version is available on the Fire GL CD.
If the Fire GL CD cannot install the Service Pack to your system, the
driver installation stops. Obtain Windows NT Service Pack 6 from
Microsoft, update your Windows NT 4.0, and run the Quick Start
utility again.

This manual is related to the following products: