3 system administration configuration – Asante Technologies 3524 Series User Manual
Page 21

 
 
 
21
IntraCore 3524 Configuration Menu 
 
 a System Administration Configuration 
 i System IP Configuration 
 b Bootstrap Configuration 
 n SNMP Configuration 
 p Port Configuration 
 s Spanning Tree Configuration 
 d Unicast Forwarding Database Configuration 
 t Security Management 
 v VLAN Management 
 c IP Multicast Traffic Management 
 m Port Mirroring Configuration 
 f File Up/Downloading Configuration 
 r System Reset Options 
 l System Log 
 u User Interface Configuration 
 y System Utility 
 q Return to previous menu 
 
Command> 
 
Accessing a Submenu 
 
To access a submenu, type the command letter that corresponds with the configuration option you need to 
use. For example, type a to access the System Administration Configuration Menu. 
 
Note: When configuring certain options on multiple units (stacked switches), the System Unit Map screen 
may appear. Type the number of the unit to be configured and press Enter. 
 
Most of the configuration options are described in detail in the rest of this chapter. The more advanced 
options are discussed in Chapter 4. Advanced Management. 
 
3.3 System Administration Configuration
 
The System Administration Configuration Menu displays and allows you to change the name of the switch, 
its location, and the contact information. 
 
IntraCore 3524 System Admin. Configuration Menu 
 
Description: Asante Technologies, Inc. IntraCore 3524 Version: FW(1.10) 
Object ID: 1.3.6.1.4.1.298.2.2.27 
Name: Test Stack 
Location: 
Contact: 
 
 n Set System Name 
 l Set System Location 
 c Set System Contact Information 
 q Return to previous menu 
 
Command>
 
Changing System Administration Info 
 
To change the name, location, or contact information for the switch, use the following procedure: 
 
1. Open the System Administration Configuration Menu by typing a in the Configuration Menu. 
2. Type the command letter (n, l or c) of the item to be changed in the System Administration 
Configuration Menu.
3. At the prompt, type the information you want to change.
 
Note: Each parameter is limited to 64 characters, including spaces. 
 
