Loading the linux iscsi offload bnx2i module, Executing the bnx2id application – HP NC532m Dual Port 10GbE Multifunction BL-c Adapter User Manual
Page 16
Installation and configuration 16
Loading the Linux iSCSI offload bnx2i module
After installing the Linux iSCSI Offload bnx2i driver and the iSCSI Offload Initiator utilities for Red Hat or
SLES, use the following command to load the Linux iSCSI Offload bnx2i module:
# modprobe bnx2i
Executing the bnx2id application
After the Linux iSCSI offload bnx2i RPM package is installed, the bnx2id application is installed under
/sbin. The driver cannot establish an iSCSI connection until the bnx2id application is executed.
Execute the bnx2id application using the following command:
# bnx2id
This manual is related to the following products:
- NC374m PCI Express Dual Port Multifunction Gigabit Server Adapter NC364m Quad Port 1GbE BL-c Adapter NC373i Integrated Multifunction Gigabit Server Adapter NC373F PCI-E Multifunction 1000SX Gigabit Server Adapter NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter NC371i Integrated PCI-X Multifunction Gigabit Server Adapter NC380T PCI-E Dual Port Multifunction Gigabit Server Adapter BladeSystem Dual NC370i Multifunction Network Adapter NC360m Dual Port 1GbE BL-c Adapter NC370F PCI-X Multifunction Gigabit Server Adapter NC373T PCI Express Multifunction Gigabit Server Adapter NC370T PCI-X Multifunction Gigabit Server Adapter