beautypg.com

Sles – HP NC532m Dual Port 10GbE Multifunction BL-c Adapter User Manual

Page 15

background image

Installation and configuration 15

If an older version of the package exists, remove the older iscsi-initiator-utils RPM package using the

following command:
# rpm -e iscsi-initiator-utils
Verify that the old package has been removed using the following command:
# rpm -q iscsi-initiator-utils

5.

Install the iscsi-initiator-utils binary RPM package using the following command:
# rpm -ivh RPMS//iscsi-initiator-utils-..rpm

6.

Start the iscsi daemon using the following command:
#/etc/init.d/iscsi start

Uninstalling the HP NC-Series iSCSI offload initiator utilities for Red Hat

If you need to uninstall the HP NC-Series iSCSI offload initiator utilities for Red Hat, use the following
command:

# rpm -e iscsi-initiator-utils-

SLES

Install HP NC-Series iSCSI Offload Initiator Utility for SLES

Install the HP NC-Series iSCSI Offload Initiator Utilities for SLES RPM package:

1.

Change to the linux\iscsi-offload directory on your hard drive and use the following command:
# rpm -ivh open-iscsi-.src.rpm

2.

Build the binary RPM for the open-iSCSI initiator utility using the following commands:
# cd /usr/src/redhat

# rpmbuild -bb SPECS/open-iscsi.spec

3.

Stop the iscsid daemon using the following command:
#/etc/init.d/open-iscsi stop

4.

Check for the existence of a current version of the open-iscsi initiator utilities package using the
following command:
# rpm -q open-iscsi
If an older version of the package exists, remove the older open-iscsi initiator utilities RPM package
using the following command:
# rpm -e open-iscsi
Verify that the old package has been removed using the following command:
# rpm -q open-iscsi

5.

Install the open-iscsi binary RPM package using the following command:
# rpm -ivh RPMS//open-iscsi-..rpm

6.

Start the open-iscsi daemon using the following command:
#/etc/init.d/open-iscsi start

Uninstalling the HP NC-Series iSCSI offload initiator utilities for SLES

If you need to uninstall the HP NC-Series iSCSI Offload Initiator Utilities for SLES RPM, use the following

command:

# rpm -e open-iscsi-