HP ProLiant DL380 Server - Manual (Page 50)

Comment or clarification Error message Error code
— Invalid value for MNPDelay. Valid range
is 0 (disabled) to 60 minutes. 2882
— Invalid controller configuration value.
Expecting Yes or No. 2883
— Invalid value for QueueDepth. Valid range
is from 2 to 32, or Auto. 2884
Using HPLPCFG
You must edit the text file to insert the WWID of the boot volume and the LUN number that the
WWID boots from. The HPLPCFG utility discovers the WWID of the HBA in the server blade and
writes the information in the text file. The text file presents the options in human readable format.
The HPLPCFG utility updates the hardware with the boot volume WWID and boot LUN read from
the text file.
HPLPCFG command-line syntax
hplpcfg /s filename hplpcfg /l filename hplpcfg /v
[HBA0] WWID=11223344 HostAdapterBiosEnable=1 SelectBootEnable=1
BootDeviceWWID=22334455 BootDeviceLUN[0]=1111
HPLPCFG command-line arguments
Description Command-line argument
This argument saves the HBA configuration to the filename. hplpcfg /s filename
This argument loads the HBA configuration to the filename. hplpcfg /l filename
This argument displays the tool version information. hplpcfg /v
Where filename has the following format:
Section for each HBA [HBA0]
Read-only variable WWID=11223344
Your input or current value when read from HBA HostAdapterBiosEnable=1
Your input or current value when read from HBA SelectBootEnable=1
Your input or current value when read from HBA BootDeviceWWID=22334455
Your input, default LUN, or current value when read from
HBA BootDeviceLUN[0]=1111
HPLPCFG return codes
Meaning Value
The command was completed successfully. 0
There was an invalid command line option. 1
There was a file open error. 2
There was an NVRAM checksum error. 3
There was an NVRAM data error. 4
50 Toolkit utilities