Creating an acu script file, Sample custom input script, Creating an acu – HP ProLiant DL380 Server User Manual
Page 36

Creating an ACU script file
To create a valid ACU script file, use one of the following methods:
•
Modify the sample custom input script
•
Create a Capture file for capturing a configuration
.
You can create a capture file from any server that has ACU loaded, and then modify the
values of options in the file as necessary for the target system. This method is useful for applying
a standard configuration to several servers that have similar storage resources.
•
Write an original script.
Each line of text in an ACU script file is in the format option = value and can be written
in uppercase or lowercase letters. For information about possible option values and the
minimum configuration information that a valid script must have, see
.
You can add blank lines and comments to any script to make it easier to read and understand. To
create a comment, enter a semicolon, and then enter the comment text. ACU ignores all text on
the same line after a semicolon.
Sample custom input script
The sample script in this section gives all possible values for each option.
•
If an option is shown in bold type, you must enter a value for that option when writing your
own script.
•
If a value is shown in bold type, ACU uses that value as a default setting when creating new
logical drives.
You can use this script as a template for your own script. The Control category has the following
options:
•
Action mode
•
Method mode
Action = Configure|Reconfigure
Method = Custom|Auto
; COMMENT: ACU cannot create a RAID 50 or RAID
60 configuration in Auto mode. You must create such configurations
manually using the Custom setting.
Controller = All | First | Slot [N][:N]| WWN [N]| SerialNumber [N]|
IOCabinet [N],IOBay [N],IOChassis [N],Slot [N],Cabinet [N],Cell [N]
ClearConfigurationWithDataLoss = Yes|No
; COMMENT: This option is now
deprecated.
LicenseKey = XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
DeleteLicenseKey = XXXXX-XXXXX-XXXXX-XXXXX-XXXXX | * ; COMMENT: *
is a wild card that enables you to delete all license keys on the
specified controller.
RAIDArrayID = “XXXXXXXXXXXXXXXXXXXX”
ReadCache = 0|10|20|25|30|40|50|60|70|75|80|90|100
WriteCache = 0|10|20|25|30|40|50|60|70|75|80|90|100
RebuildPriority =
Low|Medium|High
ExpandPriority =
Low|Medium|High
SurfaceScanDelay = N
SSPState = Enable|Disable
36
Toolkit utilities
- ProLiant BL465c Server Blade ProLiant BL2x220c G5 Server-Blade ProLiant BL2x220c G6 Server-Blade ProLiant SL390s G7 Server ProLiant BL280c G6 Server-Blade ProLiant ML370 Server ProLiant DL360p Gen8 Server ProLiant BL680c G5 Server-Blade ProLiant BL480c Server-Blade ProLiant DL370 G6 Server ProLiant SL230s Gen8 Server ProLiant SL250s Gen8 Server ProLiant SL335s G7 Server ProLiant BL260c G5 Server-Blade ProLiant DL365 G5 Server ProLiant BL490c G6 Server-Blade ProLiant BL460c Gen8 Server Blade ProLiant ML350 Server ProLiant DL160 Gen8 Server ProLiant DL585 Server ProLiant BL620c G7 Server-Blade ProLiant ML330 G6 Server ProLiant BL685c Server-Blade ProLiant DL320 Server ProLiant BL680c G7 Server-Blade Intelligent Provisioning ProLiant DL120 G7 Server ProLiant BL495c G6 Server-Blade ProLiant DL580 Server ProLiant DL380p Gen8 Server ProLiant BL2x220c G7 Server-Blade ProLiant DL785 G6 Server ProLiant BL460c Server-Blade ProLiant BL495c G5 Server-Blade ProLiant BL490c G7 Server-Blade ProLiant DL360 Server ProLiant ML310 G5 Server ProLiant DL385 Server ProLiant DL785 G5 Server ProLiant ML350p Gen8 Server