HP StoreEver Ultrium Tape Drives - Manual (Page 21)

Figure 15 Connecting cables to the LTO–6 Ultrium 6650 and LTO-5 Ultrium 3280 tape drive
SAS connector to tape drive 2. Power connector 1.
All other LTO Ultrium tape drives: Connect a spare power cord from the server's internal power
supply to the power connector on the tape drive.
Figure 16 Connecting cables to all other LTO Ultrium tape drives
Power connector 2. SAS connector 1.
CAUTION: Never use a cable where power is supplied through the SAS connector because
this may damage the drive. Always use a spare power cord from the server's internal power
supply. This caution does not apply to LTO–6 Ultrium 6650 and LTO-5 Ultrium 3280 tape
drives.
4. This will leave unused SAS cabling within the server because the other SAS connector is not
required in this configuration. Coil and secure the unused cabling so that it does not interfere
with other components inside the server.
5. Now go to Secure the drive (page 26) .
Connect SAS and power cords 21