Aiwa XR-H33MD - Manual (Page 8)

NOTE
• If the unit is not going to be used for an extended period of time, remove the batteries to prevent possible
electrolyte leakage.
• The remote control may not operate correctly when:
- The line of sight between the remote control and the remote sensor on the bottom of the front panel (see the
illustration of "BEFORE OPERATION") is exposed to intense light, such as direct sunlight.
- Other remote controls are used nearby (television, etc.)
BEFORE OPERATION
To turn the unit on
Press one of the function buttons (TAPE, TUNER, AUX/D-IN, CD, MD).
Playback of the inserted disc or tape begins, or the previously tuned station is received (Direct Play Function).
POWER button is also available.
When the unit is turned on, the disc compartment may open and close to reset the unit.
To turn the unit off
Press POWER.
DEMO (Demonstration) mode
When the AC cord is connected for the first time, the display window demonstrates the functions of the unit. When
the power is turned on, the DEMO display is overridden by the operation display. When the power is turned off, the
DEMO mode is restored.
To cancel DEMO mode
Press
SET during DEMO display. The clock display appears. (To set the current time, see "SETTING THE
CLOCK" on page 29.) To activate the DEMO mode, press .
Flash windows
The windows on the top of the unit and the MD drive light up or flash while the unit is being powered on.
To turn off the light of the top window, press the
button while pressing CD. To turn back on, repeat the above.
To turn off the light of the MD drive, press while pressing MD. To turn back on, repeat the above.