Aiwa XR-H33MD - Manual (Page 27)

5 Press the numbered buttons on the remote control to designate the tape length.
10 to 99 minutes can be specified.
Example: When using a 60 minute tape, press the 6 and 0 buttons.
In a few seconds, the microcomputer determines the tracks to be recorded on each side of the tape.
• The
and buttons are also available to designate the tape length.
6 Press the
z z TAPE REC/REC MUTE button to start recording on the first side.
The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and
recording starts. When recording on the front (side A) ends, recording on the back (side B) starts.
To stop the recording
Press
„ CLEAR. Recording and CD play stop simultaneously.
To clear the edit program
Press
„ CLEAR once in stop mode to return to the normal display.
To check the order of the programmed track numbers
Before recording, press the EDIT/CHECK button on the remote control while pressing SHIFT to select side A or B,
and press
or repeatedly. MULTI JOG is also available instead of and .
To add tracks from other discs to the edit program
If there is any time remaining on the tape after step 5, you can add tracks from other discs in the CD compartment.
1 Press the EDIT/CHECK button on the remote control while pressing SHIFT to select side A or B.
2 Press one of the DISC DIRECT PLAY 1-3 buttons to select a CD.
3 Press the numbered buttons on the remote control to select tracks. PRGM lights up.
A track which has a playing time longer than the remaining time cannot be programmed.
4 Repeat steps 2 and 3 to add more tracks.
Time on cassette tapes and editing time
The actual cassette recording time is usually a little longer than the specified recording time printed on the label.
This unit can program tracks to use the extra time. When the total recording time is a little longer than the tape's
specified recording time after editing, the display shows the extra time without a minus mark), instead of the time
remaining on the tape (with the minus mark).
NOTE
The AI edit function cannot be used with discs containing 31 tracks or more.
RECORDING (cont.) pg. 18