ArcSoft Wing HERA110 - Manual (Page 206)

206 Experiencing Multimedia
Zooming
Before capturing a still image or a video clip, you can zoom in to make the
object in focus move closer or zoom out to make the object move farther
away.
To zoom in
• Press NAVIGATION up on your device; or
• Tap the triangular Up arrow above the Zoom Ratio indicator.When the
zooming limit is reached, you will hear a beep.
To zoom out
• Press NAVIGATION down; or
• Tap the Down arrow below the Zoom Ratio indicator.
The camera zoom range for a picture or a video clip depends on the capture
mode and capture size. The following table is a summary.
Capture mode Capture size setting Zoom range
Photo
2M (1600 x 1200) No zooming available
1M (1280 x 960) 1.0x to 2.0x
Large (640 x 480) 1.0x to 2.0x
Medium (320 x 240) 1.0x to 4.0x
Small (160 x 120) 1.0x to 10.0x
Video
Medium (176 x 144) 1x and 2x
Small (128 x 96) 1x and 2x
MMS Video
Medium (176 x 144) 1x and 2x
Small (128 x 96) 1x and 2x
Contacts
Picture
Large (480 x 640) 1.0x to 2.0x
Medium (240 x 320) 1.0x to 4.0x
Small (120 x 160) 1.0x to 4.0x
Picture Theme
Determined by the current
template
Depends on the size of the
template currently loaded