ArcSoft Wing HERA110 - Manual (Page 189)

Getting Connected 189
To set up work network connections
1. Obtain the following information from your network administrator:
• Server phone number
• User name
• Password
• Domain (and other required settings, such as IP address)
2. Tap Start > Settings > Connections tab > Connections.
3. In My Work Network, follow the instructions for each type of
connection.
4. Complete the connection wizard, then tap Finish.
11.6 Starting a Data Connection
After setting up a data connection such as GPRS/EDGE or ISP dial-up
on your device, you can now connect your device to the Internet. The
connection is started automatically when you begin using a program that
accesses the Internet such as Internet Explorer Mobile.
To manually start a data connection
If you have set up multiple types of data connections on your device, you
can manually start a connection.
1. Tap Start > Settings > Connections tab > Connections.
2. Tap Manage existing connections.
3. Tap and hold the name of the desired connection, then tap Connect.
To disconnect active data connections
• Tap the Comm Manager icon ( ) on the Today screen, then tap the
Data Connection button ( ).