LG HR925S - Manual (Page 17)

Connecting 17
C
onnecting
2
Manual Tuning
All available satellite TV or radio programmes are
searched.
1. Use W/S to select the [Manual Tuning] and
press ENTER (b).
2. Select an item using W/S and If you know
the programmed [Satellite], [Frequency],
[Polarization], [Symbol Rate], [Modulation],
[Network Search] and [Search Type], use A/D
to select the desired, Fill the [Frequency] and
[Symbol Rate] field using numerical buttons.
3. Select [Start] and press ENTER (b) to begin the
channel search.
Select [Stop] and press ENTER (b) to stop the
channel search.
4. Press ENTER ( ).
y Select [Stop] and press ENTER ( b) to stop
the network search.
y If you set this option to [On], the unit will
search available transponders through
network.
,
Note
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks on
the unit to the corresponding input jacks on the
TV using Y P
B P R cables. Connect the left and right
AUDIO OUT jacks of the unit to the audio left and
right IN jacks on the TV using the audio cables.
TV
Component
video Cable
Audio Cable
Rear of this unit
TV
When you use COMPONENT VIDEO OUT
connection, you can change the resolution for
the output. (Refer to “Resolution setting” on
page 18.)
,
Note