American Dryer Corp. ADG-464 - Manual (Page 27)

23
2. Electrical Service Specifications
IMPORTANT: The dryer must be connected to the electric supply shown on the data label that is
affixed to the right side of the main electrical enclosure. In the case of 208 VAC or
240 VAC, the supply voltage must match the electric service specifications of the
data label exactly.
WARNING: 208 VAC and 240 VAC ARE NOT THE SAME. Any damage done to the dryer
components due to improper voltage will automatically VOID THE WARRANTY.
IMPORTANT: For proper sprinkler and dryer operation, sprinkler must be powered by a “separate
or dedicated” single-phase (1ø) multi-wire branch circuit at dryer’s nameplate voltage.
NOTE: For 4-wire service, cap the neutral.
NOTE: Contact the factory for electrical information not listed.
NOTE: ADC reserves the right to make changes in specifications at any time, without notice or
obligation.
ADG-464
ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)
IMPORTANT:
NOTES: A.
B.
C.
208 VAC AND 240 VAC ARE NOT THE SAME. When ordering, specify exact voltage.
When fuses are used they must be dual element, time delay, current limiting, class RK1 or RK5 ONLY.
Calculate/determine correct fuse value, by applying either local and/or National Electrical Codes to listed
appliance amp draw data.
Circuit breakers are thermal-magnetic (industrial) motor curve type ONLY. For others, calculate/
verify correct breaker size according to appliance amp draw rating and type of breaker used.
Circuit breakers for 3-phase (3Ø) dryers must be 3-pole type.
SERVICE
VOLTAGE
PHASE
WIRE
SERVICE
APPROX.
AMP DRAW
MINIMUM
WIRE SIZE
FUSING
CIRCUIT
BREAKER
Dual Element
Time Delay 60 Hz 50 Hz
208 3Ш 3/4 107 -- * 150 150
240 3Ш 3 104 109 * 150 150
380 3Ш 3/4 -- 60 * 90 90
400 3Ш 3/4 -- 60 * 90 90
416 3Ш 3/4 -- 57 * 90 90
460 3Ш 3/4 52 -- * 80 80
480 3Ш 3/4 52 -- * 80 80
* AWG Stranded Wire Type...size wire as per National Electrical Code or local codes.