beautypg.com

Clearing the events log – APC BC300 User Manual

Page 31

background image

Clearing the Events Log

990-1400A

Installation Guide APC BC300 Series 60kW 208/480V UPS

31

5.0 Clearing the Events Log

The events log contains the 250 most recent UPS events, including alarms. To clear the events
log, follow the steps below:

1. Press

and

at the same time. The display should show “Key in password”.

2. Using the key pad, enter “920701”. The display should show “Logging stack is reset”. The

events log is now cleared.

3. Press

. The display should show “Normal operation load power xx%”.

If the unit will not be in operation immediately, go to the “Start-up and Shutdown Procedure”
section.

See also other documents in the category APC Tools: