Asus P5B SE - Manual (Page 75)

ASUS P5B SE 4-5
PIO Mode [Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA]
[SWDMA2] [MWDMA0] [MWDMA] [MWDMA2] [UDMA0] [UDMA] [UDMA2]
[UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration
options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
4.3.5 IDE Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press if you wish to
configure the item.
SATA Configuration [Compatible]
Configuration options: [Compatible] [Enhanced] [Disabled]
Configure SATA as [IDE]
Sets the configuration for the Serial ATA connectors supported by the Southbridge chip.
Configuration options: [IDE] [AHCI]
Hard Disk Write Protect [Disabled]
Allows you to enable to disable the hard disk write protection. This will be effective
only if the device is accessed through BIOS.
Configuration options: [Disabled] [Enabled]
SATA Configuration
SATA Configuraton [Enhanced]
Configure SATA as [IDE]
Hard Disk Write Protect [Disabled]
IDE Detect Time Out (Sec) [35]
JMB363 RAID Controller [Enabled]
JMB363 Mode Select [IDE]
Options
Disabled
Compatiable
Enhanced