beautypg.com

Saving the settings and exiting setup, Rebuilding a mirror drive – Asus P5B SE User Manual

Page 127

background image

ASUS P5B SE

5-2

Saving the settings and exiting setup

When you have finished, highlight Save & Exit Setup using the up/down arrow key
then press to save the current RAID configuration and exit the JMB33
RAID BOS utility.

A dialogue box appears to confirm the action. Press to confirm; otherwise,
press to return to the JMB RAID BIOS menu.

To rebuild a Mirror drive:
. In the main JMB33 RAID BIOS menu, highlight Rebuild Mirror Drive using

the up/down arrow key then press .

[Main Menu]

Create RAID Disk Drive

Delete RAID Disk Drive

Revert HDD to Non-RAID

Solve Mirror Conflict

Rebuild Mirror Drive

Save and Exit Setup

Exit Without Saving

Rebuilding a Mirror Drive

When one of the disks in a RAID (Mirror) configuration is unplugged from the
system, then plugged in again, a dialogue box appears to ask you to rebuild the
Mirror drive. Press to confirm; otherwise, press .

This option allows you to rebuild the Mirror drive later and synchronize the data
between two hard disks.

2.

Using the , move to the RAID Disk Drive List menu and highlight the
RAID set that you want to rebuild. Press to begin rebuilding the Mirror
configuration.

A status bar at the bottom of the screen shows the progress of the rebuilding.

JMicron Technology Corp. PCI-to-SATA II/IDE RAID Controller BIOS v0.97

[Hard Disk Drive List]

Model Name

Capacity

Type/Status

HDD0: HDS722516VLSA80 164 GB

RAID Inside

HDD1: HDS722516DLA380 164 GB

RAID Inside

[RAID Disk Drive List]

Model Name

RAID Level

Capacity

Status

Members(HDDx)

RDD0: JRAID

1-Mirror

XXX GB

Rebuild

01

[Main Menu]
Create RAID Disk Drive

Delete RAID Disk Drive

Revert HDD to Non-RAID

Solve Mirror Conflict

Rebuild Mirror Drive

Save and Exit Setup

Exit Without Saving

Rebuilding... 01%, please wait...