Bosch NET8066SUC - Manual (Page 13)

13
Kitchen timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. You can also use the
kitchen timer when the cooktop is turned off or locked.
This function does not automatically switch off an
element.
Setting the kitchen timer
1. Touch the Timer key until the U indicator lights up.
‹‹ appears on the timer display.
2. Set the desired time using the number keys.
The timer start to count down after a few seconds.
To display the remaining time, touch the Timer key until
the U indicator lights up. After 10 seconds the timer
display will turn off.
Once the time has elapsed
A beep sounds.
‹‹ and U indicators light up. Touch the
Timer key. The indicators go out and the beep stops.
Changing the time
Touch the Timer key until the
U indicator lights up and
set a new time using number keys.
Clearing the time
Touch the Timer key until the
U indicator lights up.
Touch the 0 key until ‹‹ appears on the timer display.
The U indicator goes out.
Automatic Shutoff
The appliance features an automatic shutoff function.
Automatic shutoff is activated when the settings have not
been changed over an extended period of time. The time
when automatic shutoff is activated is based on the
temperature selected.
Shutoff Activated
”‰ appears in the display. Operation is interrupted.
Touch any key to make the display indicator disappear.
You can now adjust the settings.
Child lock
You can use the child lock to prevent children from
accidentally turning the cooktop on.
Turning the child lock on
The cooktop must be turned off.
Touch Clean Lock/Child Lock for 4 seconds. The
Ú indicator lights up for 4 seconds. The cooktop is now
locked.
Turning the child lock off
Touch Clean Lock/Child Lock for 4 seconds. The safety
panel lock is now canceled.
9 CAUTION
The child lock may be accidentally turned on and off
due to:
▯
water spilled during cleaning
▯
food that has overflowed
▯
objects being placed on the
Clean Lock/Child Lock touch key.
Automatic child lock
With this function, the child lock is automatically activated
whenever you switch off the cooktop.
Turning on and off
See "Basic settings" section.
Clean Lock
Cleaning the control panel while the cooktop is on may
change the settings.
In order to avoid this the cooktop has a Clean Lock
function. Touch Clean Lock/Child Lock. The Ú indicator
above this key appears. The control panel is locked for
approximately 35 seconds. You can now clean the
surface of the control panel without risk of changing the
settings.
After the time has elapsed a beep will sound. The Clean
Lock is deactivated.
The Clean Lock function does not affect the main switch.
You can turn off the cooktop at any time.
Basic Settings
The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Display Function
™‚ Automatic child lock
‹ Off*
‚ On
™ƒ Sound signals
‹ Confirmation beep and error signal off
‚ Only error signal on
ƒ Only confirmation beep on
„ All signals on*
*factory settings