Electrolux ZCS2560C - Manual (Page 26)

1
2
3
4
5
English
CLEANING THE HOSE AND NOZZLE
The vacuum cleaner loses suction if the nozzle, tube, hose or
filters and s-bag® becomes blocked. In such cases, disconnect
from mains and allow to cool for 20-30 minutes. Clear
blockage and/or replace filters and s-bag® and restart.
Tubes and hoses
1 Use a cleaning strip or similar to clear the tubes and hose.
2 Hose handle can be dismantled from hose if cleaning is
needed.
3 It may also be possible to remove the obstruction in the
hose by squeezing it. However, be careful in case the
obstruction is caused by glass or needles caught inside
the hose.
Note: The warranty does not cover any damage to the hose
caused by cleaning it.
Cleaning the floor nozzle
4 Be sure to frequently clean the combination floor nozzle.
Remove dust-balls, hair or other objects that may be
entangled. Larger objects can be accessed by removing the
connection tube from the nozzle.
Cleaning the turbo nozzle
(certain models only)
5 Disconnect the nozzle from the vacuum cleaner tube and
remove entangled threads, etc. by snipping them away
with scissors. Use the hose handle to clean the nozzle.
26