Electrolux ZCS2560C - Manual (Page 20)

8 7
9
4 5 3
1a
A
A
B
B
C
D
2 b 1
6
10
English
BEFORE STARTING
1 a Ensure that the machine’s carrying handle is folded
down. Then open the front cover on the machine and
check that the dust bag, s-bag®, and the motor filter are
in place.
1 b Fold up the carrying handle until it clicks into place.
Then open the back lid on the machine and check that
the exhaust filter is in place.
2 Insert the hose until the catches click to engage (press
the catches to release the hose).
3 Attach the extension tubes or telescopic tube (certain
models only) to the hose handle and hard floor nozzle
by pushing and twisting together. (Twist and pull apart
to dismantle.)
4 Insert the hose into the hose handle until the
catches
click to engage (press the catches to release the
hose).
5 Extend the electric cable and connect it to the mains.
The vacuum cleaner is fitted with a cable winder.
6 Press the foot pedal to rewind the cable (take hold of
the plug to prevent it striking you).
7 Press the On/Off button with the foot to start the
vacuum cleaner.
8 Adjust suction power using the suction control on the
vacuum cleaner or the suction control on the hose
handle.
9 Ideal parking position for pausing
10 and storing
20