Electrolux ZCS2560C - Manual (Page 22)

5 4
3
2 1
6 7
English
GETTING THE BEST RESULTS
Use nozzles as follows:
Carpets and hardfloors:
For carpets use the combination floor nozzle* with
lever in position (1)
For Hard floors, use the combination floor nozzle
with lever in position (2). Make sure the brushes on
the nozzle are down to prevent scratching the floor
surface.
Reduce suction power for short pile small carpets.
Wooden floors: Use the parquet nozzle* (3).
4 Curtains
5 Bookshelves, upholstery
Crevices, corners, etc.: Use the crevice nozzle* (6).
Using the turbo nozzle*
7 Ideal for carpets and wall-to-wall carpeting to remove
stubborn fluff and pet hairs.
Note: Do not use the turbo nozzle on animal skin rugs
or carpet fringes. To avoid damaging the carpet, do not
keep the nozzle stationary whilst the brush is rotating.
Do not pass the nozzle across electric cables, and be sure
to switch off the vacuum cleaner immediately after use.
* Certain models only.
22