Canon imagePROGRAF iPF655 User Manual
Page 761
Setting Item
Description, Instructions
GL2
Set-
tings
Quality
Man-
ager
Color
Mode
Monochrome
Print in monochrome.
Color (CAD) 1
Print in standard colors.
Color (CAD) 2
Print in brighter colors.
Color (CAD) 3
Print emulating the following printers, in colors re-
sembling colors produced by these printers: Canon BJ-
W3000/W3050.(*2
)
Color (CAD) 4
Print emulating the HP Designjet 500/800, in colors
resembling colors produced by these printers.
(*2
)
Color (CAD) 5
Print emulating the HP Designjet 1000, in colors re-
sembling colors produced by this printer.
(*2
)
Print Quality
Choose the print quality.
Input Resolution
Choose the printer input resolution, 600dpi or 300dpi.
Print (Economy)
Although printing quality is diminished, less ink is
consumed than in regular printing. Select On to con-
serve ink.
Paper
Man-
ager
Paper Source
Choose the source of paper for HP-GL/2 printing.
Margin
Specify the margin around paper. The margin for the
trailing edge of sheets is 23 mm (0.9 in).
However, if you have specified the leading margin in
Paper Details, the value in Paper Details has priori-
ty.
Conserve Paper
Conserves paper when printing.
Auto Rotate
If the long side of an original is shorter than the roll
width, the original is automatically rotated 90 degrees
to conserve paper. Similarly, if the long side of an
original in landscape orientation is longer than the roll
width and the short side is shorter than the roll width,
the original is repositioned to fit on the paper.
HP RTL print jobs are not rotated. Because HP RTL
images are not rotated even if the paper is rotated 90
degrees, images may be cut off or the blank paper may
be ejected. In this case, set Auto Rotate to Off.
Nesting
Use Nesting
Selecting On will store print jobs until multiple docu-
ments can be arranged to fill up the roll width, instead
of printing each print job as it is received.
Nesting WaitTime
Specify a time to wait until printing, as desired.
Cut Lines
Select On to print cut lines between each document on
the roll.
Line &
Pen
Man-
ager
Enable merge
Specify whether to merge or print over colors where
lines overlap.
Choose Off to print the second line over the first.
Choose On to merge all overlapping colors.
Pen
Setup
Select Palette
As pen values, choose Software, Palette A, Palette B,
or Factory.
Control Panel
>
Printer Menu
>
iPF655
Menu Settings
9
745