Canon imagePROGRAF iPF655 User Manual
Page 760
Setting Item
Description, Instructions
Adjust
Printer
Feed
Priori-
ty
Adj.
Quality
Auto(GenuinePpr)
Specify this mode with paper identified in the Paper
Reference Guide.
The printer prints and reads a test pattern for automat-
ic adjustment of the feed amount. (See "Automatic
Banding Adjustment (Adj. Quality).")
Auto(OtherPaper)
Specify this mode with paper not in the Paper Refer-
ence Guide.
The printer prints and reads a test pattern for automat-
ic adjustment of the feed amount. Note that this func-
tion takes more time and consumes more ink than Au-
to(GenuinePpr). (See "Automatic Banding Adjust-
ment (Adj. Quality).")
Manual
Use this mode with highly transparent media or other
paper for which Auto(GenuinePpr) or Auto(Other-
Paper) cannot be used.
Print a test pattern for adjustment of the feed amount
based on the type of paper. (See "Manual Banding
Adjustment (Adj. Quality).")
Adjust
Length
Adjust-
ment-
Print
A:High
Print a test pattern for particular types of paper to
compensate for paper stretching or shrinkage, after
which you enter the amount of adjustment. (See "Ad-
justing Line Length (Adjust Length).")
B:Standard/Draft
Chang
e Set-
tings
A:High
Displayed when you have selected Feed Priority >
Adj. Priority > Print Length.
Adjustment relative to the amount of stretching or
shrinkage of the current paper.
Enter either the adjustment results from Adjustment-
Print or the discrepancy that you measured (as a per-
centage).
For paper that tends to stretch, increase the feed
amount by choosing a higher adjustment value. For
paper that tends to shrink, decrease the feed amount by
choosing a lower adjustment value.
B:Standard/Draft
Main-
te-
nance
Head Cleaning
Clean the Printhead. (See "Cleaning the Printhead.")
Choose Head Cleaning A if printing is faint, oddly
colored, or contains foreign substances.
Choose Head Cleaning B if no ink is printed at all, or
if printing is not improved by Head Cleaning A.
Nozzle Check
Print a test pattern to check the nozzles.
Replace P.head
When replacing the Printhead, choose Yes and follow
the instructions on the screen. (See "Replacing the
Printhead.")
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
Repl. maint cart
When replacing the Maintenance Cartridge, choose
Yes and follow the instructions on the screen. (See
"Replacing the Maintenance Cartridge.")
Head Info
Indicates information about the printhead.
Control Panel
>
Printer Menu
>
Menu Settings
iPF655
9
744