Canon imagePROGRAF iPF6400 - Manual (Page 887)

• If the paper is jammed by the Ejection Guide
Remove the jammed paper from the Output Tray.
After removing the paper, make sure there are no oth-
er scraps of paper in the printer.
• If paper is jammed in the back of the printer
Remove the jammed paper from the back of the print-
er.
After removing the paper, make sure there are no oth-
er scraps of paper in the printer.
3
Press the OK button.
Roll paper cannot be inserted into the paper feed slot Roll paper cannot be inserted into the paper feed slot
Cause Corrective Action
The roll paper is warped. Straighten out curls and reload the roll.
Paper is jammed by the paper feed slot. Remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
→P.881
(See "Clearing a Jammed Sheet, Fed Manually.") →P.884
After a roll was advanced, the paper was manually pulled out by force, closing the
Paper Feed Slot. Remove the roll and open the paper feed slot.
(See "Removing the Roll from the Printer.")
→P.538
Cannot load sheets Cannot load sheets
Cause Corrective Action
The paper source selection is incorrect. Press the Load button and select the paper source.
Paper is not cut neatly Paper is not cut neatly
Cause Corrective Action
The paper is bent or curled at the cut position. Straighten out any curling by the edges of the paper.
iPF6400 Roll paper cannot be inserted into the paper feed slot
User's Guide
Troubleshooting
Problems Regarding Paper
887