Canon PowerShot SX170 IS - Manual (Page 77)

77
ç Contents ç Chapter Contents
Changing the Screen Displayed after Shots
Change the way images are displayed after shots as follows.
1
Set [Display Time] to [2
sec.], [4 sec.], [8 sec.], or
[Hold] ( = 76 ).
2
Configure the setting.
z z Press the < o>
buttons or
turn the < 5> dial to choose
[Display Info]. Press the
< q> buttons to choose the
desired option.
z z To restore the original setting,
repeat this process but choose
[Off].
Off Displays only the image.
Detailed Displays shooting details ( = 231 ).
• When [Display Time] ( = 76 ) is set to [Off] or [Quick], [Display
Info] is set to [Off] and cannot be changed.
• By pressing the < l> button while an image is displayed after
shooting, you can switch the display information. Note that the
settings of [Display Info] on the [ 4] tab are not changed. You can
also erase images by pressing the < a> button, or protect ( = 143 )
or tag images as favorites ( = 155 ) by pressing the < m> button.