Canon PowerShot SX170 IS - Manual (Page 113)

113
ç Contents ç Chapter Contents
2
Choose a subject to
focus on.
z z Aim the camera so that [ ] is
on the desired subject, and then
press the < q> button.
z z When the subject is detected,
the camera beeps and [ ] is
displayed. Even if the subject
moves, the camera will continue
to track the subject within a
certain range.
z z If no subject is detected, [ ] is
displayed.
z z To cancel tracking, press the
< q> button again.
3
Shoot.
z z Press the shutter button
halfway. [ ] changes to a blue
[ ], which follows the subject
as the camera continues to
adjust the focus and exposure
(Servo AF) ( = 114 ).
z z Press the shutter button all the
way down to shoot.
z z Even after your shot, [ ] is
still displayed and the camera
continues to track the subject.