Disabling eye-fi transfer, Choose [disable] in [eye-fi trans – Canon PowerShot SX170 IS User Manual

Page 218

218

Contents

Chapter Contents

Disabling Eye-Fi Transfer

Configure the setting as follows to disable Eye-Fi transfer by the

card, if necessary.

Choose [Disable] in [Eye-Fi

trans.].

Press the <

n> button,

choose [Eye-Fi Settings] on

the [

3] tab, and then press the

m> button.

Choose [Eye-Fi trans.], and

then choose [Disable].

•

[Eye-Fi Settings] is not shown unless an Eye-Fi card is

in the camera with its write-protect tab in the unlocked

position. For this reason, you cannot change settings for

an inserted Eye-Fi card if the write-protect tab is in the

locked position.