Alpine iDA-X001 - Manual (Page 24)

22
-EN
You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from General Setting, Display Setting,
etc., to select your desired setting.
1
Press and hold FUNC./SETUP for at least 2
seconds to activate the SETUP selection mode.
2
Turn the Center Jog Dial to select the desired item,
and then press ENT.
Bluetooth General Display iPod Tuner
(e.g. Select General)
3
Turn the Center Jog Dial to select a setting item,
and then press ENT.
(e.g. Select Beep)
Bluetooth:
Bluetooth IN
General:
Clock Mode Clock Adjust* 1 Calendar Type Play Mode
Beep Int Mute Int Audio CHG Name*
2
AUX IN
Auxiliary+ AUX Name* 3 AUX+ IN GAIN* 4 P.IC
Language Demo Steering
Display:
Illumination Dimmer Dimmer Level Text Scroll
BGV Select BGV Download
iPod:
Playlist Artist Album Podcast Audiobook
Genre Composer Song
Tuner:
Regional* 5 PI Seek* 6 PTY 31* 7 Auto Clock* 8
FM Level
* 1 Refer to “Setting the Time and Calendar” (page 7).
*
2
The setting can be made only when a changer is connected.
* 3 Displayed only when AUX IN is On.
* 4 Displayed only when Auxiliary+ is On.
*
5
Reter to “Receiving RDS Regional (Local) Stations” (page 9).
*
6
Reter to “PI SEEK Setting” (page 9).
* 7 Reter to “Setting PTY31 (Emergency Broadcast) reception”
(page 10).
* 8 Reter to “Setting the Time to automatically Adjust” (page 10).
4
Turn the Center Jog Dial to change the setting,
and then press ENT.
(e.g. Select Beep On or Beep Off.)
5
Press and hold BACK for 2 seconds to return to
normal mode.
• Pressing BACK during the procedure will return to the previous
mode.
• If the Center Jog Dial is turned 2 steps and held, you can change
items continuously.
Select Bluetooth from the setup main menu in step 2 above.
If an optional Bluetooth Box is connected, you can place a hands-free
call by a Bluetooth- equipped mobile phone.
Make this setting when the Bluetooth Box is connected and the
Bluetooth function is used. For details, refer to the Owner’s Manual of
the optional Bluetooth Box.
• When Int Mute is set to On, the Bluetooth setting cannot be made.
When the Bluetooth box is connected, set Int Mute to Off. Refer to
“Turning Mute Mode On/Off (Int Mute)” (page 23).
Setting the Bluetooth Connection
General is selected on the setup main menu in step 2.
Setting the Clock Display (Clock Mode)
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
Setting of Calendar Display Pattern Switching (Calendar
Type)
You can switch the calendar display pattern to be shown when the time
is displayed.
ex. D/M/Y 31/Dec/2007
Connecting an MP3 Changer (Play Mode)
Perform this setting when connecting MP3 changer. MP3 changer can
playback CDs containing both CD and MP3 data. However, in some
situations (some enhanced CDs), playback may be difficult. For these
special cases, you can select playback of CD data only. When a disc
contains both CD or the MP3 data, playback starts from the CD data
portion of the disc.
• Change discs after performing this setting.
Sound (Beep) Guide Function
This function will give audible feedback with varying tones depending
upon the button pressed.
SETUP
A typical SETUP procedure is shown in steps 1 to 5 as
follows. See below for further information about each
SETUP menu.
Center Jog Dial BACK
ENT FUNC./SETUP SOURCE/
BAND/TA
Bluetooth Setting
Bluetooth IN Adapter / Bluetooth IN Off (Initial Setting)
General Setting
24H Type (Initial setting) / 12H Type
M/D/Y / D/M/Y (Initial setting) / Y/M/D
Y : shows the year
M : shows the month
D : shows the day
CDDA (Initial setting) / CDDA&MP3
CDDA : Only CD data can be played back.
CDDA&MP3 :Both CD data and MP3 file tracks can be played
back.
Beep On (Initial setting) / Beep Off