Alpine iDA-X001 - Manual (Page 18)

16
-EN
information exists)>
1 Mode display
2 Folder name*
1
3 File name
4 Disc number
5 Folder number
6 File number
7 Elapsed time
8 RDS indicator
* 1 About Folder Name display, “ROOT” is displayed for the root folder
which does not have folder name.
* 2 Displayed during playback of a disc with CD Text.
• If there is tag information, artist name/album name/track name is
displayed.
• ID3 tag/WMA tag
If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name,
artist name, and album name). All other tag data is ignored.
• The tag information display takes priority. If there is tag information,
the folder/file name is not displayed.
• “No Support” is displayed when text information is not compatible
with the iDA-X001.
Playback
1
Press SOURCE/ to select the USB Memory or CD
CHG mode.
2
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
3
To pause playback, press / .
Pressing / again will resume playback.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Music Store and files that are copy-protected (copyright
protection) cannot be played back on this unit.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
Selecting a Disc (Changer) (Optional)
An optional 6-disc or 12-disc CD Changer may be connected to this unit
if it is Ai-NET compatible. With a CD Changer connected to the
Ai-NET input of this unit, the CD Changer will be controllable from
this unit.
Using the KCA-410C (Versatile Link Terminal) multiple changers can
be controlled by this unit.
See “Multi-Changer Selection (Optional)” on page 16 for selecting the
CD Changers.
• The controls on this unit for CD Changer operation are operative
only when a CD Changer is connected.
• The DVD changer (optional) is controllable from this unit as well as
the CD changer.
1
Press PRESET.
The Disc Select screen is displayed.
2
Turn the Center Jog Dial to select a disc.
3
Press ENT.
The selected disc number appears in the display and
CD/MP3 playback starts.
Multi-Changer Selection (Optional)
When using KCA-410C (Versatile Link Terminal), you can connect two
changers and two external outputs (AUX).
1
Press SOURCE/ on this unit to activate the CD
CHG mode.
2
Press BAND/TA to activate the CD Changer
Selection mode.
The CD Changer Selection mode remains active for several
seconds.
3
Press BAND/TA until the desired CD Changer
appears on the display.
• For further details about the external input (AUX) when using
KCA-410C, see “Setting the AUX Mode (V-Link)” on page 23.
6
8
3
1
2
7
4
5