Canon PowerShot SX700 HS - Manual (Page 149)

Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
149
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Screen Brightness
Adjust screen brightness as follows.
z z Choose [LCD Brightness], and then
press the <
q> buttons to adjust the
brightness.
•
For maximum brightness, press and hold the <
l> button for at least
two seconds when the shooting screen is displayed or when in single-image
display. (This will override the [LCD Brightness] setting on the [
3] tab.) To
restore the original brightness, press and hold the < l> button again for at
least two seconds or restart the camera.
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
z z
Choose [Start-up Image], and then
choose [Off].
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy
images on the memory card to a computer, or take other steps to back them
up.
1
Access the [Format] screen.
z z
Choose [Format], and then press the
<
m> button.
2
Choose [OK].
z z Press the < o>
buttons to choose
[Cancel], choose [OK] (either press the
<
q> buttons or turn the <5> dial),
and then press the <
m> button.