Canon EOS-1D C - Manual (Page 85)

85
Handling Error Messages
Is the pairing software running?
X Start the pairing software and follow the instructions to re-establish the
connection (p.44).
Is the target computer on?
X Turn on the target computer.
What to check on the camera
Is the camera’s network setting set to [Auto setting], or its IP
address setting set to [Auto assign]?
X If you are not using a DHCP server, set the camera’s network setting
to [Manual setting] and IP address setting to [Manual setting] (p.17).
What to check on the DHCP server
Is the DHCP server on?
X Turn the DHCP server on.
Are there enough addresses for assignment by the DHCP server?
X Increase the number of addresses assigned by the DHCP server.
X Remove devices assigned addresses by the DHCP server from the
network to reduce the number of addresses in use.
11: Connection target not found
12: Connection target not found
21: No address assigned by DHCP server
COP
Y