Canon REALIS SX80 MARK II - Manual (Page 8)

8
CHAPTER 1 • Introduction
For LV Series ■
When using LV series, specify an IP address of the projector for discovery.
Note
With LV series, you can not discover using broadcast addresses or IP -
address ranges.
With LV series, it is recommended to use a fixed IP address for the
-
projector. If DHCP is configured to automatically assign IP addresses, you
will need to reconfigure this software everytime the projector's IP address
changes.
Configure LV series with the following procedures.
From [Discovery setting] of the [Option] menu, select [LV series] to configure.
1
[Discovery settings] dialog will display.
Place a checkmark in [Enable LV series].
2
Remove a checkmark if it is not used for discovery.
Select the [IP address] tab and click the [New] button.
3
[Specify IP address] dialog will display.
COP
Y