Canon REALIS SX80 MARK II - Manual (Page 7)

7
CHAPTER 1 • Introduction
Complete the dialog with necessary information and click the [OK] button.
6
Category Description
First address Enter a first IP address in the range for discovery, in "XXX.
XXX.XXX.XXX" form.
Last address Enter a last IP address in the range for discovery, in "XXX.XXX.
XXX.XXX" form.
Community name Enter a community name within 15 alphanumeric characters
and symbols.
Timeout Enter a number of seconds to time out, from 1 to 9.
Password
(SNMP V3 only) Enter a password within 8 to 15 one-byte alphanumeric
characters and symbols.
Enable encryption
(SNMP V3 only) Place a checkmark if encrypted. Remove a checkmark if not.
Note
An error message will appear and settings will not be registered if a value -
of an entry is invalid or insufficient. Correct it as required.
Entries will be cancelled if [X] (Close) or [Cancel] button is clicked before
-
clicking the [OK] button.
To change a discovery range, select an item from the discovery range list
-
and click the [Edit] button to reconfigure the settings.
To delete an unnecessary discovery range, select an item from the
-
discovery range list and click [Delete].
COP
Y