Canon imagePROGRAF iPF6400S - Manual (Page 98)

iPF6400S Basic Guide
98
A
dju
stme
nts
fo
r B
ett
er
P
rin
t Q
ual
ity
A
dj
ust
ing
th
e
Pri
nthead
1 Load paper.
• "Loading Rolls on the Roll Holder"➔P.12
• "Loading Rolls in the Printer"➔P.14
• "Loading Sheets in the Feed Slot"➔P.21
Important
• Always make sure the loaded paper matches the type of paper specified on the printer.
Adjustment cannot be completed correctly unless the loaded paper matches the
settings.
2 On the Tab Selection screen of the Control
Panel, press
◀ or ▶ to select the Settings/Adj.
tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
3 Press the OK button.
The Set./Adj. Menu is displayed.
4 Press ▲ or ▼ to select Adjust Printer, and then press the OK button.
5 Press ▲ or ▼ to select Head Posi. Adj., and then press the OK button.
6 Press ▲ or ▼ to select Standard or Simple, and then press the OK button.
A test pattern is printed for adjustment.
Adjustment is now finished if you have printed on a roll.
7 If you are printing on cut sheets, a confirmation message is displayed on the Display Screen
asking you whether to continue printing.
Press the OK button and follow the instructions on the Display Screen.