Canon imagePROGRAF iPF6400S - Manual (Page 30)

iPF6400S Basic Guide
30
Handl
ing
P
ape
r
H
andli
ng shee
ts
9 Remove the sheet, keeping the front edge level
as you pull it out.
Important
• If POP Board is accidentally removed at an angle, it may scratch the printed surface.
10 Press the OK button.
Removing Sheets
Remove sheets from the printer as follows.
• "Removing sheets from the top paper feed slot"➔P.30
• "Removing heavyweight sheets from the front paper feed slot"➔P.31
Note
• The operations for a printer with a Spectrophotometer Unit (option) are the same as for a
printer with no Spectrophotometer Unit (option).
Removing sheets from the top paper feed slot
1 On the Tab Selection screen of the Control
Panel, press
◀ or ▶ to select the Paper tab
( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2 Press the OK button.
The Paper Menu is displayed.
3 Press ▲ or ▼ to select Eject Paper, and then press the OK button.
4 Press ▲ or ▼ to select Yes, and then press the OK button.
The paper is ejected from the front of the printer.