Canon PowerShot A2600 - Manual (Page 82)

82
1
2
3
4
5
6
7
8
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Hiding the Start-up Screen
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
z z Choose [Start-up Image], and then
choose [Off].
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy images
on the memory card to a computer, or take other steps to back them up.
An Eye-Fi card ( = 101 ) contains software on the card itself. Before
formatting an Eye-Fi card, install the software on a computer.
1 Access the [Format] screen.
z z Choose [Format], and then press the
< m> button.
2 Choose [OK].
z z Press the < o>
buttons to choose
[Cancel], press the < q> buttons to
choose [OK], and then press the < m>
button.
3 Format the memory card.
z z To begin the formatting process, press
the < o>
buttons to choose [OK],
and then press the < m> button.
z z When formatting is finished, [Memory
card formatting complete] is displayed.
Press the < m> button.
• Formatting or erasing data on a memory card only changes file
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards, take
steps to protect personal information if necessary, as by physically
destroying cards.
• The total card capacity indicated on the formatting screen may be less than
the advertised capacity.