Inserting the battery – Canon PowerShot A2600 User Manual
Page 13
13
1
2
3
4
5
6
7
8
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
•
To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
•
For battery chargers that use a power cord, do not attach the
charger or cord to other objects. Doing so could result in malfunction
or damage to the product.
•
For details on charging time and the number of shots and recording time
possible with a fully charged battery, see “Number of Shots/Recording Time,
•
Charged batteries gradually lose their charge, even when they are not used.
Charge the battery on (or immediately before) the day of use.
•
The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For
power outlets in a different format, use a commercially available adapter for
the plug. Never use an electrical transformer designed for traveling, which may
damage the battery.
A2600
Inserting the Battery
Insert the included battery.
1
Open the cover.
z
z
Slide the cover ( ) and open it ( ).
2
Insert the battery.
z
z
While pressing the battery lock in the
direction of the arrow, insert the battery
as shown and push it in until it clicks into
the locked position.
z
z
If you insert the battery facing the wrong
way, it cannot be locked into the correct
position. Always confirm that the battery
is facing the right way and locks when
inserted.
3
Close the cover.
z
z
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
Terminals
Battery
Lock