Canon Macro Twin Lite MT-24EX - Manual (Page 13)

11
1 Loosen the locking ring.
Turn the locking ring as shown by the
arrow to loosen it.
2 Attach the control unit.
Slip the control unit’s mounting foot
into the camera’s hot shoe all the
way.
3 Tighten the locking ring.
Turn the locking ring as shown by the
arrow. The locking pin will then
protrude from the mounting foot.
To detach the control unit, loosen the
locking ring until the locking pin
retracts, then detach the control unit.
Attaching the Control Unit
MR14_MT24_01.fm Page 11 Tuesday, December 20, 2005 4:35 PM
COP
Y