Canon LV 7490 - Manual (Page 40)

40
VIDEO Input
VIDEO System Selection
1
AV System Menu (VIDEO or S-VIDEO)
AV System Menu (COMPONENT)
2
If the projector cannot reproduce proper video
image, select a specific broadcast signal format
from among PAL, SECAM, NTSC, NTSC 4.43,
PAL-M and PAL-N.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector automatically detects an incoming
video signal, and adjusts itself to optimize its
performance.
If the projector cannot reproduce proper video
image, select a specific component video signal
format from among 480i, 575i, 480p, 575p,
720p, 1035i and 1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
VIDEO or S-VIDEO
COMPONENT
The projector automatically detects an incoming
video system, and adjusts itself to optimize its
performance. When VIDEO System is PAL-M or
PAL-N, select the system manually.
Auto
 Note:
The AV System Menu cannot be selected when
selecting SCART.
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select Input and then press the Point ►
button or the OK button.
Use the Point ▲▼ buttons to select VIDEO,
S-VIDEO or Computer 1(Component) and
then press the OK button.
3 Use the Point ▲▼ buttons to select System
and then press the Point ► button or the OK
button. Use the Point ▲▼ buttons to select
the desired system and then press the OK
button.