Canon LV 7490 - Manual (Page 13)

Part Names and Functions
13
Part Names and Functions
 Note:
To ensure safe operation, please observe the following
precautions:
– Do not bend, drop or expose the remote controller to
moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply
benzene, thinner, spray, or any chemical material.
Remote controller
⑦
⑭
⑩
⑳ ④
⑱
②
⑧
⑨
⑬
⑯
⑤
⑥
⑪
⑫
⑲
⑮
③
② AUTO SET button
Execute the setting of Auto setup (includes
Auto input, Auto PC and Auto Keystone
functions) in the setting menu. (pp.25, 47)
⑤ S-VIDEO button
Select the S-VIDEO input source. (p.38)
⑥ Point ▲▼◄► buttons
– Select an item or adjust the value in the
On-Screen Menu. (p.26)
– Pan the image in the Digital zoom +/-
mode. (p.37)
⑬ MUTE button
Mute the sound. (p.26)
⑦ ASPECT button
Select a screen mode. (pp.28, 36-37, 44-45)
⑮ P-TIMER button
Operate the P-timer function. (pp.28, 52)
⑩ BLANK button
Temporarily turn off the image on the screen.
(p.28)
⑯ LAMP button
Select a lamp mode. (pp.27, 54)
⑱ KEYSTONE button
Correct keystone distortion. (p.25)
⑲ OK button
– Execute the selected item. (p.23)
– Zoom in or out the image in Digital zoom
mode. (p.37)
⑧ MENU button
Open or close the On-Screen Menu. (p.26)
⑨ FREEZE button
Freeze the picture on the screen. (p.27)
⑫ VOLUME +/- buttons
Adjust the volume level. (p.26)
① POWER button
Turn the projector on or off. (pp.20-22)
③ COMPUTER 1/2 buttons
Select the COMPUTER 1 or COMPUTER 2
input source. (pp.29, 39)
⑪ D .ZOOM +/- buttons
Zoom in and out the images. (pp.27, 37)
⑭ IMAGE button
Select the image mode. (pp.28, 34, 42)
⑳ COMPONENT button
Select the COMPONENT input source. (p.39)
④ VIDEO button
Select the VIDEO input source. (p.38)
⑰
⑰ INFO. button
Operate the information function. (p.59)
①