Multi-sensor error, Error in cutter position, Multi-sensor error error in cutter position – Canon imagePROGRAF iPF650 User Manual

Page 850

Text mode
Original mode

Multi-sensor error

Cause

Corrective Action

Direct sunlight or strong lighting may be shin-
ing on the printer and causing the sensor to
malfunction.

Take steps to ensure the printer is not used when exposed to direct
sunlight or strong lighting.

The performance of a sensor inside the printer
may be impaired.

Turn off the printer and wait at least three seconds before restoring
the power.
If the message is displayed again, contact your Canon dealer for as-
sistance.

Error in cutter position.

Cause

Corrective Action

The Cutter Unit stops in the middle of cutting.

Push the Release Lever back and remove the paper.

Pull the Release Lever forward.

Error Message

Other Messages

Multi-sensor error

iPF650

834