Canon imagePROGRAF iPF650 User Manual
Page 100
7.
Select and click a roll paper in the
L
Paper Source list.
8.
Select the width of the loaded roll in the
M
Roll Paper Width list—in this case, ISO A2/A3 Roll (420.0mm).
9.
In the
A
Page Size list, click the size of the original as specified in the application. In this case, click ISO A4.
10.
Select the
C
Enlarged/Reduced Printing check box.
11.
Click ISO A4 in the
G
Paper Size list.
12.
Click
F
Scaling and enter 120.
Note
• You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom
and right edges of the paper will not be printed.
• If the original size after enlargement or reduction is smaller than the paper size, the original is prin-
ted in the upper-left corner. In this case, you can center originals by selecting
E
Print Centered on
the Layout sheet.
13.
Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings(Windows)
Enhanced Printing Options
>
Printing enlargements or reductions
>
Resizing Originals by Entering a Scaling Value (Windows)
iPF650
2
84